If you are interest in our machine like slitting line,cut to length line. You have three ways to inquiry them.1.Feel free to inquiry the machine by email to us. Email:king..........com2.Make a telephone.The number is 0086-769-87307370 / 0086-769-873607363.Leave a website message...........com..........netWe will reply you as soon as possible after receipt of your order.

We are providing OEM services for our competitors from European country and Janpan company.KingJime is a pressional factory of cut to length line, slitting line , pipe making machine and 3 in 1 feeder and so on

Our company is verified by ISO9001, ISO14001.We got the certifications of CE(LVE EMC)for the products including cut to length line, slitting line, nc servo feeder and more.

Straightening machines today fall into two basic categories, the most common of which are known as "straighteners" or "flatteners". This arrangement is generally available in models with between 5 and 11 work rolls. The roll diameters and center distances vary depending on material thickness and width but straighteners and flatteners are generally distinguished by fairly large diameter, widely spa...

Failure and Solution in 3 in 1 compact feeder.Feeding error and only a fixed direction 1.Pressure is not enough from feeding rollersIncrease pressure2.Feeding length is too long.Shorten the feeding length 3.Feeding material is not enough.Inspect material width and position of guiding board on the die. 3 in 1 Machine and punch tools should be in line.4.There is some waste on the punch toolsSee if ...

1.push the button coil car forward and backward. Load the coil on the coil car.2.operate the decoiler mandrel to collapse the smallest. 3.push the button coil car lifts the coil up until the core of the coil is the line of the decoiler mandrel, and operate the coil car move to the coil to the decoiler mandrel. 4.push the button decoiler expansion, the decoiler expand the coil. Note: In the coil lo...

How to use the automatic decoiler which made by kingjime company to feed material?1.Uncoiler has been set to standard in our factory: When metal coil strip touches the sensor rod, machine will stop at once. When coil leaves the sensor rod for a few minutes (sensor time), the machine will start to work. 2.The Sensor time set short or long affects to the operating and service life for machine. You c...

How to install the straightener? Let's take the BAL1000 for example. 1.Move the equipment by a crane to the foundation and fasten it with underground bolts. 2.Ensure the center line of the straightener inline with the center line of the press 3.Clean the equipment and fill the lubrication oil. 4.Follow the electric drawing and install the cables. Note: Input power: 3 phase, 380v(420/220) AC,Co...

Let's take the coil car in KJS1.5X800 Precision Slitting Line as a example to show you what is Hydraulic coil car. The coil car is welded by full steel plates, with V-shape supporting platform, side movement driven by electrical drive, lift up and down by hydraulic drive with four uprights. Hydraulic cylinder spec: Φ125x350mm; Motor type: 1.5KW cycloid needle wheel type motor. Load bearing: 8 ton...

All of kingjime machine，such as cut to length line, slitting line, feeder, uncoiler, decoiler, pipe making machine will follow the list warranty services. Warranty: One year of warranty service will be provided from the date the machine is delivered. For damage to machine occurred in handling and failure not resulting from misuse during the warranty period, we will provide replacement of parts...

Inquiry for the machine--offer with technical proposal and layout--purchasing order--payment--production--delivery--installation.

What is the delivery time for one cut to length line and slitting line?

30% down payment by T/T. 70% balance by L/C at sight.

Normally, it will take 30 days.

The 3 in 1 compact feed machine can save the space in the factory and save the foundation cost. It can make it accurate feed by servo motor.

We are using the servo motor from Siemens from Germany, servo motor brand name using in the machine. We are using the servo motor from Siemens from Germany, Yaskawa from Japan, Lenz from Germany.

Siemens, Onrom, Mitsubishi.

We will give one year warranty time to the customer.

The cut to length line will cut to sheet in crossing way and measuring the length you want from PLC program. The slitting line will cut the sheet in vertical way and need the spacer to measure the width in the slitter shaft and recoiling the small size of coil.

We inspect the machine according to ISO 9001 standard and test the machine before delivery and we make our machine with CNC equipment in our factory. Our machines are high quality ones.