Slitting line machine not only for the steel service cutting industry, but also for the pipe industry.
I. Technical Data
Slitting lines KJS120 Model |
Model | Sheet Thickness(mm) | Coil Width(mm) | No.Slitting | 公差(mm) | Line Speed (m/min) | Coil Weight(t) |
KJS120-1*650 | 0.2-1 | 150-650 | 30-8 | ±0.05 | 0-120 | 3、5 |
KJS120-1*850 | 0.2-1 | 300-850 | 30-8 | ±0.05 | 0-120 | 5、10 |
KJS120-1*1050 | 0.2-1 | 300-1050 | 30-8 | ±0.05 | 0-120 | 5、10 |
KJS120-1*1300 | 0.2-1 | 400-1300 | 30-8 | ±0.05 | 0-120 | 10、15 |
KJS120-2*650 | 0.3-2 | 150-650 | 30-8 | ±0.05 | 0-120 | 3、5 |
KJS120-2*850 | 0.3-2 | 300-850 | 30-8 | ±0.05 | 0-120 | 5、10 |
KJS120-2*1050 | 0.3-2 | 300-1050 | 30-8 | ±0.05 | 0-120 | 5、10 |
KJS120-2*1300 | 0.3-2 | 400-1300 | 30-8 | ±0.05 | 0-120 | 10、15 |
KJS120-2*1600 | 0.3-2 | 400-1600 | 30-8 | ±0.05 | 0-120 | 15、20 |
KJS120-2*2000 | 0.3-2 | 500-2000 | 30-8 | ±0.05 | 0-120 | 15、20 |
KJS120-3*1300 | 0.4-3 | 400-1300 | 30-6 | ±0.05 | 0-120 | 10、15 |
KJS120-3*1600 | 0.4-3 | 400-1600 | 30-6 | ±0.05 | 0-120 | 15、20 |
KJS120-3*2000 | 0.4-3 | 500-2000 | 30-6 | ±0.05 | 0-120 | 15、20 |
KJS120-4*1300 | 0.5-4 | 400-1300 | 30-6 | ±0.05 | 0-120 | 10、15 |
KJS120-4*1600 | 0.5-4 | 400-1600 | 30-6 | ±0.05 | 0-120 | 15、20 |
KJS120-4*2000 | 0.5-4 | 500-2000 | 30-6 | ±0.05 | 0-120 | 15、20 |
KJS120-6*1600 | 0.6-6 | 400-1600 | 30-5 | ±0.08 | 0-120 | 15、20 |
KJS120-6*2000 | 0.6-6 | 500-2000 | 30-5 | ±0.08 | 0-120 | 15、20 |
KJS120 series slitting production line is the most popularized standrad line for customer to cut material upto 6mm thick, 2000mm width of coil ,with speed 120m/min,cutting strips 30 pieces. It has the merit of extensive application scope.The machine can do uncoiling,straightening, slitting and recoiling works. Machine consists of uncoiler ,straightener ,front loop,slitting machine,scrap winder, rear loop,tension unit ,recoiler ,asisting support ,exit coil car ,hydraulic system ,electrical system and so on.
The whole line is controlled by PLC with computer display. We mainly apply computer-control system of brands Mitsubishi, Yaskawa, Siemens, Baumueller, Delta, and Schneider. The information of order amount, cutting strips and speed can be input to the PLC systems.This line is highly automatic with low cost ,long sevice life reliable performance .
Most customer used it together with pipe mill machine ,KJS120 series get highly praise from customers at home and abroad .
3. Machine parts in the working line
1. coil car
2. decoiler
3. peeler entry table
4. Straightener.
5. Shearing machine
6. loop table
7. coil guide and pinch roll
8. Slitting machine
9. scrap winder (both sides)
10. Loop table
11. separator and tension table
12. Deflector roll and exit threading table
13. Recoiler
14. Over arm separator in the recoiler.
15. Exit coil car for recoiler
16. Hydraulic system
17. pneumatic system
18. electrical control system
4.About us
Kingjime machine Limited is a TaiWan of Chinese technological enterprise manufacturer with Japanese technology to make steel coil cut to length line ,slitting line ,High Frequency pipe mill machine,feeder machine .We owned National high and new technology enterprise with 40 patents and intellectual property rights over the last for years.welcome to kingjimemachine as they!
we have established steady cooperation with customers in over 58 countries.