We provide Tension leveling lines to remove any shape defects present in the Coiled material.
I.Technical Data of the tension leveling line
Model No. | Coil thick | Coil width | Speed (m/min) | Coil weight |
(mm) | (mm) |
KJL-2X650 | 0.2-2mm | 100-500 | 80 | 5tons |
KJL-2X850 | 0.2-2mm | 100-800 | 80 | 5tons |
KJL-2X1300 | 0.2-2mm | 100-500 | 80 | 10tons |
KJL-3X550 | 0.2-3mm | 100-500 | 80 | 5tons |
KJL-3X850 | 0.2-3mm | 100-800 | 80 | 5tons |
KJL-3X1300 | 0.2-3mm | 500-1250 | 80 | 15tons |
KJL-3X1600 | 0.2-3mm | 500-1600 | 80 | 15tons |
KJL-3X2000 | 0.2-3mm | 500-2000 | 80 | 20tons |
KJL-4X1600 | 0.2-4mm | 500-1600 | 80 | 15tons |
KJL-6X1600 | 0.5-6mm | 500-1600 | 60 | 15tons |
KJL-6X2000 | 0.5-6mm | 500-2000 | 60 | 20tons |
II.Introduction of the tension leveling line
We provide Tension leveling lines to remove any shape defects present in the Coiled material. In the steel industry stringent tolerances for the end product necessitates the requirement for Tension leveling of the Coil product to remove any edge to edge length differential, such as so called ‘edge waves’.
With Tension leveling, all parts of the Coil strip are pulled past the yield point, top to bottom, edge to edge. All the trapped stress is removed in the process & the strip pulled out is relatively free of the internal stresses.
The Tension Leveller arrangements include of an undriven leveller with entry and exit bridles. In the automated lines the degree of elongation is determined by the difference in the speed or the tension generated between the bridles. The Tension levellers are available with different drive options such as closed loop mechanical differentials, all-electrical drives and combination electrical-mechanical drives.
III. Machine parts in the working line
1.Coil car
2.Decoiler
3.Straightener
4.Ehearing machine 1
5.Welding machine
6.Entry Tension roll
7.Tension leveler
8.Exit Tension roll
9.Shearing machine 2
10.Deflector roll
11.Recoiler
12.Recoiler.
13.Exit coil car for recoiler
14.Hydraulic system
15.Pneumatic system
16.Electrical control system
About us
Kingjime machine Limited is a TaiWan of Chinese technological enterprise manufacturer with Japanese technology to make steel coil cut to length line ,slitting line ,High Frequency pipe mill machine,feeder machine .We owned National high and new technology enterprise with 40 patents and intellectual property rights over the last for years.welcome to kingjimemachine as they!
we have established steady cooperation with customers in over 58 countries.